A common problem that faces homeowners centers on the plumbing system operating in their homes. When working well, everyone often takes them for granted. However, when they cease to function, the entire household may find themselves inconvenienced because the water or bathroom systems do not work correctly. However, if you believe you have a water issue in the home, four tips for checking for plumbing leaks may help pinpoint the exact cause of the plumbing problem.
1. Check the Floor and Ceiling
A straightforward test involves checking the floor underneath the sink or toilet to determine if the floor has stains. The stains may come from leaking water from nearby pipes, and this clue can help in resolving the leak quickly. In addition, upstairs plumbing may cause leaks in downstairs ceilings, so check these as well.
2. Check the Water Meter or Pump
Turn off the main water supply and check your water meter outside your home or the water pump if you have a well. If you discover that the meter or pump continues to run, you know you have a water leak somewhere. You can then search for any wet spots on the lawn, following the waterline route to the house. If you find a damp area, that could indicate that underneath that spot is a broken underground water pipe causing the problem.
3. Check Under the House
Look under the house with a flashlight for any signs of dampness. Wet ground or insulation under the house could indicate a water leak.
4. Test for Leaks
Testing, such as pressure testing Claremore OK, for example, can determine if your pipes have leaks. After emptying the water pipes in question, an air compressor gets attached to an outlet, like the sink faucet, and then compressed air gets sent into the pipes. If the pipes cannot maintain appropriate levels of compression, then you know you have a leak.
Most homeowners turn to professionals for help with their complicated plumbing systems. Subsequently, plumbing companies can efficiently determine the source of a water leak and provide repairs as needed.